The Efficiency of Segmental Le Fort I Surgery in Clear Aligner Therapy of Skeletal Class III Deformity: A Pilot Study.

INTRODUCTION: The purpose of this study was to investigate the efficiency of segmental Le Fort I osteotomy in clear aligner therapy of skeletal Class III deformities and to explore whether Le Fort I segmental osteotomy was effective for maxillary incisor axis correction and reduced the duration of perioperative orthodontics. MATERIALS AND METHODS: Patients who had skeletal Class III deformities (ANB<0) treated with extraction of the maxillary first premolars, segmental Le Fort I osteotomy, and clear aligners therapy were included in this retrospective study. We measured the amount of tooth extraction space that was closed by surgery and recorded the preoperative orthodontic and total treatment duration. Lateral cephalograms were analyzed to measure changes of maxillary incisor inclination before treatment (T0), 1 week before surgery (T1), 1 week after surgery (T2), and after total orthodontic treatment (T3). Statistical analyses were performed, and the P value was set at 0.05. RESULTS: The sample was composed of 15 patients aged 19 to 30 (M=22.9) years. The average preoperative orthodontic treatment duration was 16.2±5.22 mo, with 33.5 pairs of clear aligners. The gap at the extraction site decreased from 5.42±1.57 mm to 0.80±0.62 mm on average after surgery. U1-SN and U1-NA(deg) increased sparingly with preoperative decompensation, decreased in quantity after surgery, and then slightly increased with postoperative compensation (T20.05). CONCLUSIONS: Le Fort I segmental osteotomy assisted decompensation of the upper anterior teeth and reduced the duration of preoperative orthodontics with clear aligners.

From hemostasis to proliferation: Accelerating the infected wound healing through a comprehensive repair strategy based on GA/OKGM hydrogel loaded with MXene@TiO2 nanosheets.

The treatment of infected wounds poses a formidable challenge in clinical practice due to the detrimental effects of uncontrolled bacterial infection and excessive oxidative stress, resulting in prolonged inflammation and impaired wound healing. In this study, we presented a MXene@TiO2 (MT) nanosheets loaded composite hydrogel named as GA/OKGM/MT hydrogel, which was formed based on the Schiff base reaction between adipic dihydrazide modified gelatin (GA)and Oxidized Konjac Glucomannan (OKGM), as the wound dressing. During the hemostasis phase, the GA/OKGM/MT hydrogel demonstrated effective adherence to the skin, facilitating rapid hemostasis. In the subsequent inflammation phase, the GA/OKGM/MT hydrogel effectively eradicated bacteria through MXene@TiO2-induced photothermal therapy (PTT) and eliminated excessive reactive oxygen species (ROS), thereby facilitating the transition from the inflammation phase to the proliferation phase. During the proliferation phase, the combined application of GA/OKGM/MT hydrogel with electrical stimulation (ES) promoted fibroblast proliferation and migration, leading to accelerated collagen deposition and angiogenesis at the wound site. Overall, the comprehensive repair strategy based on the GA/OKGM/MT hydrogel demonstrated both safety and reliability. It expedited the progression through the hemostasis, inflammation, and proliferation phases of wound healing, showcasing significant potential for the treatment of infected wounds.

Preparation of cellulose-based flexible SERS and its application for rapid and ultra-sensitive detection of thiram on fruits and vegetables.

In response to the prevalent issue of thiram as a common pesticide residue on the surface of fruits and vegetables, our research team employed an acidic hydrated metal salt low co-fusion solvent to dissolve cellulose lysis slurry. Subsequently, a regenerated cellulose membrane (RCM) was successfully prepared via sol-gel method. Uniformly sized Ag nanoparticles (NPs) were deposited on RCM utilizing the continuous ion layer adsorption and reaction (SILAR) technique. The resulting Ag NPs/RCM flexible surface-enhanced Raman spectroscopy (SERS) substrates exhibited a minimum detection limit of 5 × 10-9 M for Rhodamine 6G (R6G), demonstrating good uniformity (RSD = 4.86 %) and reproducibility (RSD = 3.07 %). Moreover, the substrate displayed a remarkable sensitivity of 10-10 M toward thiram standard solution. Given its inherent flexibility, the substrate proves advantageous for the detection of three-dimensional environments such as fruit and vegetable surfaces, and its practicality has been confirmed in the detection of thiram residue on apples, tomatoes, pears, and other fruits and vegetables.

Polydopamine-Modified Titanium Dioxide Nanotube Arrays Doped with Calcium as a Sustained Drug Delivery System.

Titanium nanotube (TNT) arrays manufactured via electrochemical anodization have been widely used as local drug carriers due to their excellent biocompatibility and customizable nanotubular structures. However, the uncontrollable and abrupt drug release at the early stage decreases the drug release duration, leading to excessive drug concentration at the implantation site. In this study, a continuous drug delivery system based on TNTs was created. Initially, a basic ultrasound-assisted approach was utilized to deposit a polydopamine (PDA) coating onto TNTs to obtain PDA-modified TNTs. Next, TNTs-PDA were submerged in a calcium chloride solution to include Ca2+ through Ca2+ coordination between the PDA layer's catechol groups. Sodium alendronate (NaAL) was used as a model drug and loaded onto TNTs-PDA-Ca2+ by immersing them in an NaAL solution. In the final step, NaAL was covalently attached to TNTs-PDA-Ca2+ through coordination bonds with Ca2+. The samples underwent characterization through the use of various techniques, including field emission scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction patterning, X-ray photoelectron spectroscopy, and inductively coupled plasma emission spectrometry. The results indicated that the bioactivity of TNTs improved, and there was an enhancement in drug loading capacity and release performance due to modification with PDA and Ca2+. Furthermore, acidic conditions can cause significant drug release due to the cleavage of coordination bonds between the drug and Ca2+ ions. Thus, the aforementioned drug delivery system represents a potentially promising approach for achieving sustained and controllable drug release.

A Dual Reversible Cross-Linked Hydrogel with Enhanced Mechanical Property and Capable of Proangiogenic and Osteogenic Activities for Bone Defect Repair.

The clinical treatment of bone defects presents ongoing challenges. One promising approach is bone tissue engineering (BTE), wherein hydrogels have garnered significant attention. However, the application of hydrogels in BTE is severely limited due to their poor mechanical properties, as well as their inferior proangiogenic and osteogenic activities. To address these limitations, our develop a dual cross-linked alendronate (ALN)-Ca2+ /Mg2+ -doped sulfated hyaluronic acid (SHA@CM) hydrogel, using a one-step mixing injection molding method known as "three-in-one" approach. This approach enabled the simultaneous formation of Schiff-Base crosslinking and electric attraction-based crosslinking within the hydrogel. The Schiff-Base crosslinking contributed to the majority of the hydrogel's mechanical strength, while the electric attraction-based crosslinking served as a release reservoir for Ca2+ /Mg2+ and ALN, promoting enhanced osteogenic activities and providing additional mechanical reinforcement to the hydrogel. These experimental data demonstrates several favorable properties of the SHA@CM hydrogel, including satisfactory injectability, rapid gelation, self-healing capacity, and excellent cytocompatibility. Moreover, the presence of sulfated groups and Mg2+ within the SHA@CM hydrogel exhibited pro-angiogenic effects, while the controlled release of nanoparticles formed by Ca2+ /Mg2+ and ALN further enhanced the osteogenesis of the hydrogel. Overall, these results indicate that the SHA@CM hydrogel holds significant potential for the clinical translation of BTE.

3D printing of MOF-reinforced methacrylated gelatin scaffolds for bone regeneration.

Scaffolds based on gelatin (Gel) play a crucial role in bone tissue engineering. However, the low mechanical properties, rapid biodegradation rate, insufficient osteogenic activity and lacking anti-infective properties limit their applications in bone regeneration. Herein, the incorporation of ibuprofen (IBU)-loaded zeolitic imidazolate framework-8 (ZIF-8) in a methacrylated gelatin (GelMA) matrix was proposed as a simple and effective strategy to develop the IBU-ZIF-8@GelMA scaffolds for enhanced bone regeneration capacity. Results indicated that the IBU-loaded ZIF-8 nanoparticles with tiny particle sizes were uniformly distributed in the GelMA matrix of the IBU-ZIF-8@GelMA scaffolds, and the IBU-loaded ZIF-8 growing in the scaffolds enabled the controlled and sustained releasing of Zn2+ and IBU in pH = 5.5 over a long period for efficient bone repair and long-term anti-inflammatory activity. Furthermore, the doping of the IBU-loaded ZIF-8 nanoparticles efficiently enhanced the compression performance of the GelMA scaffolds. In vitro studies indicated that the prepared scaffolds presented no cytotoxicity to MC3T3-E1 cells and the released Zn2+ during the degradation of the scaffolds promoted MC3T3-E1 cell osteogenic differentiation. Thus, the drug-loaded ZIF-8 modified 3D printed GelMA scaffolds demonstrated great potential in treating bone defects.

Cu(II)@MXene based photothermal hydrogel with antioxidative and antibacterial properties for the infected wounds.

The regeneration of skin tissue is often impeded by bacterial infection seriously. At the same time, reactive oxygen species (ROS) are often overexpressed in infected skin wounds, causing persistent inflammation that further hinders the skin repair process. All of these make the treatment of infected wounds is still a great challenge in clinic. In this study, we fabricate Cu(II)@MXene photothermal complex based on electrostatic self-assembly between Cu2+ and MXene, which are then introduced into a hyaluronic acid (HA) hydrogel to form an antibacterial dressing. The rapid adhesion, self-healing, and injectability of the dressing allows the hydrogel to be easily applied to different wound shapes and to provide long-term wound protection. More importantly, this easily prepared Cu(II)@MXene complex can act as a photothermal antibacterial barrier, ROS scavenger and angiogenesis promoter simultaneously to accelerate the healing rate of infected wounds. Our in vivo experiments strongly proved that the inflammatory condition, collagen deposition, vessel formation, and the final wound closure area were all improved by the application of Cu(II)@MXene photothermal hydrogel dressing.

Green in situ immobilisation of gold nanoparticles on bacterial nanocellulose membranes using Tannic acid and its detection of Fe3.

Oxidative stress is one of the factors that promote melanogenesis. Trivalent iron ions play a key role in regulating the iron-catalysed oxidative stress response. A novel SERS flexible membrane sensor based on tannic acid with good sensitivity and uniformity was prepared by green in situ reduction of gold nanoparticles on bacterial cellulose membrane（BCM）with a simple and highly selective method to detect Fe3+. Under alkaline conditions, Fe3+ is adsorbed on the BCM-TA@Au NPs flexible membrane by tannic acid (TA) through chelation, thus enabling the detection of Fe3+. Furthermore, this simple detection system has a wide linear detection range and high sensitivity to effortlessly evaluate Fe3+ at concentrations up to 10-7 M. More importantly, the proposed SERS flexible substrate performed well in determining Fe3+ concentrations in B16 melanocytes, providing new insights into the factors affecting the melanin synthesis pathway and providing a potential biomarker for melanoma treatment.

Low-Temperature Adaptive Dual-Network MXene Nanocomposite Hydrogel as Flexible Wearable Strain Sensors.

Flexible electronic devices and conductive materials can be used as wearable sensors to detect human motions. However, the existing hydrogels generally have problems of weak tensile capacity, insufficient durability, and being easy to freeze at low temperatures, which greatly affect their application in the field of wearable devices. In this paper, glycerol was partially replaced by water as the solvent, agar was thermally dissolved to initiate acrylamide polymerization, and MXene was used as a conductive filler and initiator promoter to form the double network MXene-PAM/Agar organic hydrogel. The presence of MXene makes the hydrogel produce more conductive paths and enforces the hydrogel's higher conductivity (1.02 S·m-1). The mechanical properties of hydrogels were enhanced by the double network structure, and the hydrogel had high stretchability (1300%). In addition, the hydrogel-based wearable strain sensor exhibited good sensitivity over a wide strain range (GF = 2.99, 0-200% strain). The strain sensor based on MXene-PAM/Agar hydrogel was capable of real-time monitoring of human movement signals such as fingers, wrists, arms, etc. and could maintain good working conditions even in cold environments (-26 °C). Hence, we are of the opinion that delving into this hydrogel holds the potential to broaden the scope of utilizing conductive hydrogels as flexible and wearable strain sensors, especially in chilly environments.

Multifunctional hydrogel enhances bone regeneration through sustained release of Stromal Cell-Derived Factor-1α and exosomes.

Fracture nonunion remains a great challenge for orthopedic surgeons. Fracture repair comprises of three phases, the inflammatory, repair and remodeling stage. Extensive advancements have been made in the field of bone repair, including development of strategies to balance the M1/M2 macrophage populations, and to improve osteogenesis and angiogenesis. However, such developments focused on only one or the latter two phases, while ignoring the inflammatory phase during which cell recruitment occurs. In this study, we combined Stromal Cell-Derived Factor-1α (SDF-1α) and M2 macrophage derived exosomes (M2D-Exos) with a hyaluronic acid (HA)-based hydrogel precursor solution to synthesize an injectable, self-healing, adhesive HA@SDF-1α/M2D-Exos hydrogel. The HA hydrogel demonstrated good biocompatibility and hemostatic ability, with the 4% HA hydrogels displaying great antibacterial activity against gram-negative E. coli and gram-positive S. aureus and Methicillin-resistant Staphylococcus aureus (MRSA). Synchronously and sustainably released SDF-1α and M2D-Exos from the HA@SDF-1α/M2D-Exos hydrogel enhanced proliferation and migration of human bone marrow mesenchymal stem cell (HMSCs) and Human Umbilical Vein Endothelial Cells (HUVECs), promoting osteogenesis and angiogenesis both in vivo and in vitro. Overall, the developed HA@ SDF-1α/M2D-Exos hydrogel was compatible with the natural healing process of fractures and provides a new modality for accelerating bone repair by coupling osteogenesis, angiogenesis, and resisting infection at all stages.

Preparation of nanofibrous poly (L-lactic acid) scaffolds using the thermally induced phase separation technique in dioxane/polyethylene glycol solution.

Porous nanofibrous poly (L-lactic acid) (PLLA) scaffolds were fabricated in combination with a thermally induced phase separation technique using a dioxane/polyethylene glycol (PEG) system. The effect of factors such as molecular weight of PEG, aging treatment, aging or gelation temperature, and the ratio of PEG to dioxane were investigated. The results revealed that all scaffolds had high porosity, and had a significant impact on the formation of nanofibrous structures. The decrease in the molecular weight and aging or gelation temperature leads to a thinner and more uniform fibrous structure.

An injectable and self-healing hydrogel with dual physical crosslinking for in-situ bone formation.

Although hydrogels have been widely studied because of their satisfactory biocompatibility and plasticity, their application is limited in bone tissue engineering (BTE) owing to their inadequate mechanical properties and absence of osteogenic activity. To address this issue, we developed an updated alendronate (ALN)-Ca2+/Mg2+-doped supramolecular (CMS) hydrogel based on our previously developed mechanically resilient "host-guest macromer" (HGM) hydrogel to improve the hydrogel's mechanical properties and osteogenic activity. The CMS hydrogel was prepared by introducing a new physical crosslinking comprising the strong chelation of the comonomer acrylate alendronate (Ac-ALN) and Ca2+/Mg2+ in the HGM hydrogel. Compared with the previously developed HGM hydrogel, the upgraded CMS hydrogel presented better mechanical properties because of the additional physical crosslinking, while possessing injectable and self-healing properties like the HGM hydrogel. Moreover, the addition of Ac-ALN and Ca2+/Mg2+ also effectively promoted the in vitro proliferation, migration, and osteogenic differentiation of bone marrow-derived stem cells. The healing effect of a rat cranial defect further proved that the in vivo bone regeneration ability of CMS hydrogel was better than that of HGM hydrogel. The updated CMS hydrogel shows significant potential for BTE application.

Corrigendum: Resilient and Self-Healing Hyaluronic Acid/Chitosan Hydrogel With Ion Conductivity, Low Water Loss, and Freeze-Tolerance for Flexible and Wearable Strain Sensor.

[This corrects the article DOI: 10.3389/fbioe.2022.837750.].

The fabrication of multifunctional sodium alginate scaffold incorporating ibuprofen-loaded modified PLLA microspheres based on cryogenic 3D printing.

A strategy to develop a multifunctional sodium alginate personalized scaffold with enhanced mechanical stability, osteogenesis activity and excellent anti-inflammatory activity by cryogenic 3 D printing combined with subsequent crosslinking with Sr2+ is proposed in this study. The ink for 3 D printing was prepared by dispersing modified PLLA droplets containing ibuprofen into sodium alginate aqueous solution using lecithin as stabilizer. The results showed that the drug-loaded microspheres formed from the low-temperature solidifying of the modified PLLA droplets were homogeneously dispersed in sodium alginate substrate, and the scaffold displayed a sustained drug release performance toward ibuprofen which endowed the scaffold with persistent anti-inflammatory effects. In vitro cell culture indicated that the lecithin not only acted as the stabilizer, but also stimulated the proliferation and mineralization of osteoblastic cells on the scaffold. Sr2+-crosslinking improved the mechanical properties and osteogenic activity of the scaffold.

Highly Transparent, Self-Healing, and Self-Adhesive Double Network Hydrogel for Wearable Sensors.

Hydrogel-based flexible electronic devices are essential in future healthcare and biomedical applications, such as human motion monitoring, advanced diagnostics, physiotherapy, etc. As a satisfactory flexible electronic material, the hydrogel should be conductive, ductile, self-healing, and adhesive. Herein, we demonstrated a unique design of mechanically resilient and conductive hydrogel with double network structure. The Ca2+ crosslinked alginate as the first dense network and the ionic pair crosslinked polyzwitterion as the second loose network. With the synthetic effect of these two networks, this hydrogel showed excellent mechanical properties, such as superior stretchability (1,375%) and high toughness (0.57 MJ/m3). At the same time, the abundant ionic groups of the polyzwitterion network endowed our hydrogel with excellent conductivity (0.25 S/m). Moreover, due to the dynamic property of these two networks, our hydrogel also performed good self-healing performance. Besides, our experimental results indicated that this hydrogel also had high optical transmittance (92.2%) and adhesive characteristics. Based on these outstanding properties, we further explored the utilization of this hydrogel as a flexible wearable strain sensor. The data strongly proved its enduring accuracy and sensitivity to detect human motions, including large joint flexion (such as finger, elbow, and knee), foot planter pressure measurement, and local muscle movement (such as eyebrow and mouth). Therefore, we believed that this hydrogel had great potential applications in wearable health monitoring, intelligent robot, human-machine interface, and other related fields.

Resilient and Self-Healing Hyaluronic Acid/Chitosan Hydrogel With Ion Conductivity, Low Water Loss, and Freeze-Tolerance for Flexible and Wearable Strain Sensor.

Conductive hydrogel is a vital candidate for the fabrication of flexible and wearable electric sensors due to its good designability and biocompatibility. These well-designed conductive hydrogel-based flexible strain sensors show great potential in human motion monitoring, artificial skin, brain computer interface (BCI), and so on. However, easy drying and freezing of conductive hydrogels with high water content greatly limited their further application. Herein, we proposed a natural polymer-based conductive hydrogel with excellent mechanical property, low water loss, and freeze-tolerance. The main hydrogel network was formed by the Schiff base reaction between the hydrazide-grafted hyaluronic acid and the oxidized chitosan, and the added KCl worked as the conductive filler. The reversible crosslinking in the prepared hydrogel resulted in its resilience and self-healing feature. At the same time, the synthetic effect of KCl and glycerol endowed our hydrogel with outstanding anti-freezing property, while glycerol also endowed this hydrogel with anti-drying property. When this hydrogel was assembled as a flexible strain sensor, it showed good sensitivity (GF = 2.64), durability, and stability even under cold condition (-37°C).

Osteoblast/Osteoclast and Immune Cocktail Therapy of an Exosome/Drug Delivery Multifunctional Hydrogel Accelerates Fracture Repair.

The osteoblast/osteoclast and M1/M2 macrophage ratios play critical roles in delayed fracture healing. Robust osteoblast differentiation and M2 macrophage polarization can substantiality promote fracture repair; however, the combined effect of these strategies has not been previously studied. In this study, we constructed a cocktail therapy to simultaneously regulate the osteoblast/osteoclast and M1/M2 macrophage balance. The cocktail therapy composed of a natural polymer hyaluronic-acid-based hydrogel (HA hydrogel, which has a tissue-adhesive, injectable, self-healing, anti-inflammation profile), engineered endothelial cell-derived exosomes (EC-ExosmiR-26a-5p), and APY29, an IRE-1α inhibitor. This allowed for specific delivery of EC-ExosmiR-26a-5p and APY29 for osteoblast/osteoclast and macrophage regulation, respectively. The results suggested that the cocktail therapy exerted pro-fracture repair effects with each of its components established as indispensable. The assessed cocktail therapy provides insight into synergistic strategies and is useful for developing more suitable pro-fracture repair therapy.

Cryogenic 3D printing of modified polylactic acid scaffolds with biomimetic nanofibrous architecture for bone tissue engineering.

The individualized polylactic acid (PLA) scaffolds fabricated by 3D printing technique have a good application prospect in the bone tissue engineering field. However, 3D printed PLA scaffold mainly manufactured by using a Fused Deposition Modelling fabrication technique (FDM) has some disadvantages, such as having smooth surface, strong hydrophobicity, poor cell adhesion, undesirable bioactivity, the degradation and deterioration at a high temperature triggering an inflammatory response. In this work, the aminated modified polylactic acid nanofibrous scaffold prepared by cryogenic 3D printing technology is designed to provide a feasible countermeasure to solve the key problems existing at present. The prepared scaffolds were fully characterized in terms of physico-chemical and morphological analyses, and the collected results revealed that the using of the cryogenic 3D printing technology can effectively avoid the degradation and deterioration of PLA at a high temperature required by FDM technique and promote the formation of nanofibrous structures. The in vitro tests with MC3T3-E1 cells confirmed that the cell-responsive biomimetic fibrous architecture and improved hydrophilicity due to the introduction of hydrophilic active amino groups provided a bioactive interface for cell adhesion and growth. Meanwhile, the active amino groups introduced by ammonolysis reaction can act as active sites for biomineralization. Thus, the as-prepared scaffolds may hold great potential for bone tissue engineering applications.

All-in-One: Multifunctional Hydrogel Accelerates Oxidative Diabetic Wound Healing through Timed-Release of Exosome and Fibroblast Growth Factor.

The treatment of diabetic wounds remains a major challenge in clinical practice, with chronic wounds characterized by multiple drug-resistant bacterial infections, angiopathy, and oxidative damage to the microenvironment. Herein, a novel in situ injectable HA@MnO2 /FGF-2/Exos hydrogel is introduced for improving diabetic wound healing. Through a simple local injection, this hydrogel is able to form a protective barrier covering the wound, providing rapid hemostasis and long-term antibacterial protection. The MnO2 /ε-PL nanosheet is able to catalyze the excess H2 O2 produced in the wound, converting it to O2 , thus not only eliminating the harmful effects of H2 O2 but also providing O2 for wound healing. Moreover, the release of M2-derived Exosomes (M2 Exos) and FGF-2 growth factor stimulates angiogenesis and epithelization, respectively. These in vivo and in vitro results demonstrate accelerated healing of diabetic wounds with the use of the HA@MnO2 /FGF-2/Exos hydrogel, presenting a viable strategy for chronic diabetic wound repair.